Daiwa 21 TD Sol MQ Spin Reel

Sorry, there's only22011available

  • An iconic range from Daiwa just got an upgrade, the all-new Daiwa TD Sol MQ Spin Reel now features, you guessed it, Daiwa's Monocoque (MQ) one-piece body design, for better performance and better protection from the elements. All with the same quality of finish and precision-made insides as the previous model to ensure silky smooth operation and high performance at all times.

    The Monocoque body delivers an all-round improved reel structure. Firstly, reducing potential ingress points for water and debris into the gearbox, MQ reels remove the normal side plate design. MQ bodies are IPX rated thanks to the elimination of that seam and the screws which traditionally hold the side plate to the main body assembly. Secondly, MQ-equipped reels like the Daiwa TD Sol MQ reels enjoy the additional volume created inside the gearbox by installing a drive gear, which is much larger in diameter than reels without MQ technology. To put it simply, MQ-equipped reels have a bigger gear and therefore have increased power, durability, and torque than competitor reels.

    The Daiwa TD Sol MQ reel's body is made from the new Zaion V material, a high rigidity carbon composite material that can be formed into incredibly tough & rigid bodies that are impervious to the harsh destructive elements of saltwater fishing, all whilst keeping the weight of the reel right down.

    The Daiwa TD Sol MQ spin reel steps ahead when it comes to the rotor and bail design, incorporating a Zaion Air Rotor and seamless one-piece Airbail construction usually reserved for Daiwa's top-end reels. This lightweight and rigid rotor design gives the TD Sol MQ incredibly low start-up inertia, which is great for setting a hook nice and quick.

    Daiwa's Magseal has been utilised on both the body of the TD Sol MQ reels and on the line roller, which further prevents saltwater intrusion in the key areas of the reel.

    A host of other Daiwa technologies including Long Cast ABS, ATD drags (2000S & 2500S feature felt washers, 2500D, 3000D & 4000D-C are Carbon) and Twistbuster II make the Daiwa TD Sol MQ spin reel the most highly featured TD Sol since the iconic orange reel first landed in Australia.

    If you’re looking for a feature-packed small spinning reel capable of tussling with a host of fresh and saltwater predators, look no further than the eye-catching Daiwa TD Sol MQ Reel.

    Features:

    • Monocoque Body: MQ Body takes reel design to the next level. The MQ system does not require a conventional side plate, instead using an engine plate to screw directly to the body. Eliminating the need for screws to hold a body cover in place. MQ body improves the strength of the reel, it also improves the water resistance of the body and allows a larger diameter drive gear to be installed.
    • Zaion V Body: A new generation of lightweight Daiwa’s resin and carbon material. The Zaion V material is both strong and incredibly lightweight.
    • Magsealed Body: Ultimate protection is delivered to the engine room of the reel with a magnetised oil seal located on the main shaft of the reel’s rotor shutting the door to the elements and unwanted intruders. Dust, water, and salt intrusion into the inner workings of a reel are a thing of the past with MagSeal.
    • Corrosion Resistant Ball Bearings (CRBB): Lasting 12 times longer than standard stainless steel bearings Daiwa’s CRBBs feature specially treated stainless steel, and a protective shield on the bearing race that seals out sand, fine grit, salt crystals and other abrasives. The result is a longer-lasting bearing that’s protected from the corrosive elements that destroy traditional bearings.
    • ATD Drag: Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start-up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
    • Air Rotor: Lighter, stronger and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate line roller support. Made from Zaion and featuring a redesigned arch that disperses pressure to the lower section of the rotor to reduce stressing and flexing, the design is further enhanced with a hollowed out construction reducing weight, while increasing reel sensitivity and rotational balance.
    • ABS Long Cast Spool: The LC-ABS has been shown to increase the average flight distance by approx. 5% due to its reduced weight and modified shape.
    • Air Bail: A hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight.
    • Screw-In Handle: For both simplicity and strength.
    • Twist Buster II: The tapered line roller is enhanced to eliminate line twist like never before.
    Model reel type braid capacity Drag Power gear ratio bearings Weight Price
    2000S Spinning Reel PE0.4/300m 5kg 5.1:1 8BB (5CRBB); 1RB 175g $399.00
    2500S Spinning Reel PE0.6/200m 5kg 5.2:1 8BB (5CRBB); 1RB 195g $399.00
    2500D Spinning Reel PE1.2/300m 10kg 5.3:1 8BB (5CRBB); 1RB 190g $399.00
    3000D Spinning Reel PE1.5/300m 10kg 5.3:1 8BB (5CRBB); 1RB 210g $399.00
    4000D-C Spinning Reel PE2/300m 12kg 5.2:1 8BB (5CRBB); 1RB 220g $399.00
  • Shipping Information

    Each item in our online store is marked as either a 'Standard Item', 'Large Item', 'Oversized Item' or an 'In-store Only Item', each of which have their own shipping and delivery costs and characteristics.

    Shipping Costs

    Orders over $60 - FREE standard shipping, $6 express shipping (excludes large & oversized items)

    Orders under $60 - $8.99 standard shipping, $12.99 express shipping (excludes large & oversized items)

    Store pickup - FREE

    Orders containing large items - $14.99 standard shipping, express shipping unavailable

    Orders containing oversized items - custom shipping cost required. After you place your order online as an 'in-store pickup', we will contact you regarding a customised shipping fee (minimum $14.99). Sometimes this fee is low, but if it's too high you can request a full refund.

    NOTE: Sometimes we have to split your order and send multiple parcels, if this happens we will let you know and send through a tracking number for each parcel. When multiple parcels are sent we cannot guarantee that they will arrive at the same time.

    For all shipping details, click here.

    Handling Times

    Orders placed before 9:30am that contain standard items only will be sent the same day if all items are in stock.

    Orders containing large or oversized items are sent with a courier and picked up from our store one business day after we process them.

    For orders with missing items, we may be able to transfer them from our second store location which can take between 1-3 days. If this happens with your order, we will contact you asap to let you know of the delay.

    We do not send items on weekends or public holidays, an exception being the weeks leading up to Christmas. Thus, items ordered on Friday after 9:30am will be sent Monday.

    Delivery Times

    Standard shipping - 1-6 business days

    Express shipping - 1-4 business days

    Large/oversized item standard shipping - 2-10 business days

    NOTE: Delivery times may vary depending on your location, availability of items in your order, or during peak order periods.

    Returns

    Available up to 3 days after receiving your order provided that all products are unused and they're still in their original condition and packaging.

    For change-of-mind returns:

    • All return costs are paid by the buyer
    • Original shipping costs are non-refundable

    See the full returns and refunds policy here.

Search